CLA SENS013 Black Adjustable PIR Motion Sensor IP44 180°
$38.04 inc GST
Black IP44 three-wire adjustable PIR light sensor with 180° detection angle, up to 12m at less than 24°C, LED load up to 600W and IP44 protection. Delay adjustable from around 10 seconds to 15 minutes.

Fast Shipping
On All Orders

Australian Company
Owned & Operated

15+ Years
Industry Experience

Easy Returns
30 Days Peace Of Mind
20 in stock
Description
CLA SENS013 Black Adjustable PIR Motion Sensor IP44 180°
The CLA SENS013 is the black version of its sheltered IP44 wall-mounted PIR sensor. Its passive infrared motion detection covers a nominal 180° field, with a claimed maximum 12m distance in the manufacturer test conditions below 24°C. The sensor switches connected lighting on when movement is detected, then switches it off after the selected delay. This is a three-wire mains sensor, not a cordless or stand-alone security camera. Its actual coverage depends on mounting height, weather, motion direction and surrounding obstructions.
Applications and design features
The IP44 model is appropriate only where that ingress protection suits the site, such as a sheltered entrance. Do not substitute it for the IP65 or IP66 versions in a more exposed position. The adjustable time delay spans approximately 10 seconds to 15 minutes; ambient-light sensitivity can be set across the specified 3–2000 lux range. Crucially, CLA publishes different connected-load limits: 1200W for halogen and 600W for LED, rather than one universal 1200W load rating. This variant includes a manufacturer-listed manual override feature.
Technical specifications for SENS013
- Part number: SENS013
- Brand: CLA
- Sensor technology: Passive infrared (PIR)
- Finish: Black
- Mounting: Surface mounted
- Detection angle: 180°
- Maximum detection distance: 12m at <24°C
- Recommended mounting height: 1.8–2.5m
- Supply: 220–240V AC 50/60Hz, three-wire
- Maximum halogen load: 1200W
- Maximum CFL load: 600W
- Maximum LED load: 600W
- Adjustable switch-off delay: 10s to 15min (approx.)
- Ambient light setting: 3–2000 lux
- Ingress protection: IP44
- Housing: Polycarbonate
- Manual override: Yes, manufacturer-listed
Compatibility, use and installation
The controlled lighting load must remain within its technology-specific limit, including LED driver inrush. Check that the supply and three-wire connection suit the existing circuit. PIR detection responds to temperature movement, so obstructions, heat sources and the approach direction can affect performance. A licensed electrician should install, set up and test the fitting, maintain the required ingress protection and follow the CLA mounting-height guidance. Browse more lighting products from iSupply Electrical.
Additional information
| Bulk Orders Please Call | |
|---|---|
| Type | |
| Finish | Black |
| IP rating | IP44 |
| Detection angle | 180° |
| LED load | 600W |







