CLA SENS001 White Adjustable PIR Motion Sensor IP65 180°

$50.42 inc GST

White IP65 three-wire adjustable PIR light sensor with 180° detection angle, up to 12m at less than 24°C, LED load up to 300W and IP65 protection. Delay adjustable from around 10 seconds to 15 minutes.

fast-delivery

Fast Shipping

On All Orders


Australian Company

Owned & Operated

worker

15+ Years

Industry Experience

30-days

Easy Returns

30 Days Peace Of Mind

20 in stock

Description

CLA SENS001 White Adjustable PIR Motion Sensor IP65 180°

The CLA SENS001 is the white version of its basic outdoor wall-mounted PIR sensor. Its passive infrared motion detection covers a nominal 180° field, with a claimed maximum 12m distance in the manufacturer test conditions below 24°C. The sensor switches connected lighting on when movement is detected, then switches it off after the selected delay. This is a three-wire mains sensor, not a cordless or stand-alone security camera. Its actual coverage depends on mounting height, weather, motion direction and surrounding obstructions.

Applications and design features

The IP65 version can automate suitable wall-mounted entry, pathway or utility lighting where its 180° detection pattern and mounting height match the approach direction. The adjustable time delay spans approximately 10 seconds to 15 minutes; ambient-light sensitivity can be set across the specified 3–2000 lux range. Crucially, CLA publishes different connected-load limits: 1200W for halogen and 300W for LED, rather than one universal 1200W load rating. Confirm switching behaviour against the precise model instructions before wiring an override.

Technical specifications for SENS001

  • Part number: SENS001
  • Brand: CLA
  • Sensor technology: Passive infrared (PIR)
  • Finish: White
  • Mounting: Surface mounted
  • Detection angle: 180°
  • Maximum detection distance: 12m at <24°C
  • Recommended mounting height: 1.8–2.5m
  • Supply: 220–240V AC 50/60Hz, three-wire
  • Maximum halogen load: 1200W
  • Maximum CFL load: 300W
  • Maximum LED load: 300W
  • Adjustable switch-off delay: 10s to 15min (approx.)
  • Ambient light setting: 3–2000 lux
  • Ingress protection: IP65
  • Housing: Polycarbonate
  • Manual override: Not confirmed on current product page

Compatibility, use and installation

The controlled lighting load must remain within its technology-specific limit, including LED driver inrush. Check that the supply and three-wire connection suit the existing circuit. PIR detection responds to temperature movement, so obstructions, heat sources and the approach direction can affect performance. A licensed electrician should install, set up and test the fitting, maintain the required ingress protection and follow the CLA mounting-height guidance. Browse more lighting products from iSupply Electrical.

Additional information

Bulk Orders Please Call

Type

Finish

White

IP rating

IP65

Detection angle

180°

LED load

300W