CLA SENS002 Black Adjustable PIR Motion Sensor IP65 180°
$50.42 inc GST
Black IP65 three-wire adjustable PIR light sensor with 180° detection angle, up to 12m at less than 24°C, LED load up to 300W and IP65 protection. Delay adjustable from around 10 seconds to 15 minutes.

Fast Shipping
On All Orders

Australian Company
Owned & Operated

15+ Years
Industry Experience

Easy Returns
30 Days Peace Of Mind
20 in stock
Description
CLA SENS002 Black Adjustable PIR Motion Sensor IP65 180°
The CLA SENS002 is the black version of its basic outdoor wall-mounted PIR sensor. Its passive infrared motion detection covers a nominal 180° field, with a claimed maximum 12m distance in the manufacturer test conditions below 24°C. The sensor switches connected lighting on when movement is detected, then switches it off after the selected delay. This is a three-wire mains sensor, not a cordless or stand-alone security camera. Its actual coverage depends on mounting height, weather, motion direction and surrounding obstructions.
Applications and design features
The IP65 version can automate suitable wall-mounted entry, pathway or utility lighting where its 180° detection pattern and mounting height match the approach direction. The adjustable time delay spans approximately 10 seconds to 15 minutes; ambient-light sensitivity can be set across the specified 3–2000 lux range. Crucially, CLA publishes different connected-load limits: 1200W for halogen and 300W for LED, rather than one universal 1200W load rating. Confirm switching behaviour against the precise model instructions before wiring an override.
Technical specifications for SENS002
- Part number: SENS002
- Brand: CLA
- Sensor technology: Passive infrared (PIR)
- Finish: Black
- Mounting: Surface mounted
- Detection angle: 180°
- Maximum detection distance: 12m at <24°C
- Recommended mounting height: 1.8–2.5m
- Supply: 220–240V AC 50/60Hz, three-wire
- Maximum halogen load: 1200W
- Maximum CFL load: 300W
- Maximum LED load: 300W
- Adjustable switch-off delay: 10s to 15min (approx.)
- Ambient light setting: 3–2000 lux
- Ingress protection: IP65
- Housing: Polycarbonate
- Manual override: Not confirmed on current product page
Compatibility, use and installation
The controlled lighting load must remain within its technology-specific limit, including LED driver inrush. Check that the supply and three-wire connection suit the existing circuit. PIR detection responds to temperature movement, so obstructions, heat sources and the approach direction can affect performance. A licensed electrician should install, set up and test the fitting, maintain the required ingress protection and follow the CLA mounting-height guidance. Browse more lighting products from iSupply Electrical.
Additional information
| Bulk Orders Please Call | |
|---|---|
| Type | |
| Finish | Black |
| IP rating | IP65 |
| Detection angle | 180° |
| LED load | 300W |







