CLA OTTER4 12V DC 100W IP67 Constant Voltage LED Driver

$130.71 inc GST

CLA OTTER4 waterproof-rated IP67 constant-voltage driver: 12V DC output, 100W nominal capacity, recommended connected load 10–80W.

fast-delivery

Fast Shipping

On All Orders


Australian Company

Owned & Operated

worker

15+ Years

Industry Experience

30-days

Easy Returns

30 Days Peace Of Mind

20 in stock

SKU: OTTER4 Categories: , Tags: , , , , , , Brand:

Description

CLA OTTER4 12V DC 100W IP67 Constant Voltage LED Driver

The CLA OTTER4 converts a suitable mains input to regulated 12V DC for compatible constant-voltage LED lighting. It is not a constant-current driver and should not be chosen for a luminaire that specifies a different supply voltage. The 100W rating identifies this exact OTTER model, which has IP67 protection at the driver enclosure.

Applications and design features

This driver helps supply suitable LED strips or garden and step fittings within its stated electrical limits. For planning, CLA recommends a minimum 10% load and maximum 80% of the nameplate capacity, giving approximately 10W to 80W connected load. Allow for cable voltage drop and individual loads rather than assuming the number of light fittings alone confirms suitability.

Technical specifications for OTTER4

  • Part number: OTTER4
  • Driver type: Constant voltage; not constant current
  • DC output: 12V
  • Rated capacity: 100W
  • CLA recommended minimum load: 10W
  • CLA recommended maximum load: 80W
  • Enclosure rating: IP67
  • Protections: Short circuit, overload, over-temperature
  • Input supply: 170–265V AC 50/60Hz
  • LED compatibility: 12V constant-voltage loads only
  • Control type: Non-dimming unless verified for the specific load and controller

Compatibility, use and installation

For higher-output OTTER versions, the manufacturer describes split output leads: do not place the full rated load onto a single lead; follow the conductor-specific wiring diagram. IP67 describes the power supply enclosure; joints, glands and connected fittings need their own suitable rating. A licensed electrician must check input wiring, load calculations and location before installation. Browse more lighting products from iSupply Electrical.

Additional information

Bulk Orders Please Call

Type

Output voltage

12V DC

Wattage

100W

IP rating

IP67

Driver type

Constant voltage