CLA DRIV1 Round IP20 12V DC 12W Constant Voltage LED Driver
$49.67 inc GST
CLA round constant-voltage LED driver, 12V DC output and 1–12W rated range; manufacturer recommends 1.2–9.6W loading. IP20, 240V AC supply.

Fast Shipping
On All Orders

Australian Company
Owned & Operated

15+ Years
Industry Experience

Easy Returns
30 Days Peace Of Mind
20 in stock
Description
CLA DRIV1 Round IP20 12V DC 12W Constant Voltage LED Driver
CLA DRIV1 is an indoor round 12V DC electronic LED driver. The round housing and DRIV1 code distinguish it from the other driver in this range despite the shared nominal output.
Applications and design features
The device converts the mains supply to a stable 12V DC output for compatible low-voltage LED lighting. CLA nominates 1–12W as the rated load span while advising that the connected lighting should run at approximately 10–80% of the 12W rating. That gives a practical target of 1.2–9.6W and leaves electrical headroom. The IP20 housing is intended for suitably protected indoor installation; it cannot substitute for an IP65 or IP67 driver in a wet or exposed position. CLA sets a maximum 2m distance to the light source. Check the output type carefully because a 12V AC halogen transformer is not equivalent.
Technical specifications for DRIV1
- Manufacturer part number: DRIV1
- Brand: CLA Lighting
- Part format: Round
- Output: 12V DC constant voltage
- Rated power: 12W
- Rated load range: 1–12W
- CLA recommended operating load: 1.2–9.6W
- Supply: 240V AC, 50/60Hz
- Ingress rating: IP20
- Maximum LED cable run: 2m
Compatibility, use and installation
Use with 12V DC constant-voltage LED fittings within the recommended load window. Keep the driver in a dry serviceable area with suitable ventilation and a maximum 2m driver-to-light run. Do not connect it to a 12V AC-only globe or constant-current LED board. An electrician should confirm connections and insulation. Browse more lighting products from iSupply Electrical.
Additional information
| Bulk Orders Please Call | |
|---|---|
| Type | |
| Output voltage | 12V DC |
| Rated power | 12W |
| Recommended load | 1.2–9.6W |
| IP rating | IP20 |





